A Guide to Refinishing Hardwood Floors

Before refinishing your hardwood floors, you should prepare the floor thoroughly. This includes cleaning the floor with mineral spirits or a damp rag to remove dust. Make sure you use only oil-based cleaners on the floor, as these will impact the final finish.

Price of refinishing hardwood floors

Many factors affect the price of Hardwood Refinishing. First, consider the size of the room you’d like refinished. For example, a 10-foot by 10-foot bedroom will cost between $300 and $500, whereas a 16-foot by 16-foot living room will run anywhere from $1,800 to $2,300. The price will also depend on the prep work needed and where you live.

Another factor that impacts the price is the type of wood. Certain types of wood require a high-quality finish to prevent staining or fading. Cherry wood floors, for example, typically cost $3 to $5 per square foot to refinish. If you’re refinishing a cherry floor, you’ll want to choose a stain that enhances, rather than detracts from, the natural beauty of the wood.

Preparation for refinishing hardwood floors

Preparation is the key to a successful refinishing project. You will need to remove all furniture, area rugs, and houseplants from the rooms where the floors will be refinished. Also, ensure that gas and electric appliances are turned off, and the pilot lights are out. You will need to thoroughly clean the rooms, including walls and countertops. You can call a professional if you need help with this.

The first step in refinishing your hardwood floors is determining the type of wood you’ve installed. Several varieties of flooring may look like hardwood but are actually made of other materials. Each one will require a different refinishing technique.

Types of polyurethanes available for refinishing hardwood floors

When refinishing hardwood floors, several types of polyurethanes can be used. Some are more expensive than others and have different properties. Some of them also have different gloss levels. Depending on your needs, you can choose a high-gloss, satin, or semi-gloss finish.

Satin finish: This finish has a moderate luster. It is a popular choice for most types of hardwood floors but is not suitable for high-traffic areas. The shine isn’t too noticeable and is easy to clean. However, it does have a few disadvantages.

Oil-based polyurethane: This type is less expensive than water-based polyurethane and won’t change over time. However, it may cause a yellow tint to the wood, especially on dark wood.

Equipment needed for refinishing hardwood floors

You’ll need a few tools if you’re planning on refinishing your hardwood floors. First of all, you’ll need a floor sander. This equipment is essential for the job because it removes the bulk of the stock from the wood. There are two basic types: belt sanders and drum sanders.

If you’re doing it yourself, it’s best to rent equipment. Usually, you can rent refinishing tools from a home improvement store. Just make sure you ask for a demonstration before renting them. You’ll need to know how to use them properly before you begin refinishing.

Another thing you’ll need to know is the type of floor you’re working with. Some floors are made of solid wood, which is 3/4 inch thick. Others are made of engineered wood, which has layers of thin wood.

Also Read: 5 Different Kinds of Countertop Edge

The upkeep is required after refinishing hardwood floors.

There are several upkeep steps that you must take after refinishing hardwood floors. First, you must ensure that your floor is free of cracks or damage. It would help if you also ensured that any exposed nails or protrusions are flush with the surface. If you need more time to do this yourself, you can hire a company to do it for you.

Refinishing hardwood floors is an excellent way to give your home a fresh and modern look. The process is relatively inexpensive and will make your floor look new again. To prepare for refinishing, you must clear the workspace and remove all furniture. You will also need to remove any carpets covering the floor.